DVI mapping

[wec]

I have been mapping fields to the DVI and have found no way to populate the Etyp or edge type field in the DVI. I have contacted Crystal support who confirmed that it is not currently mapped to any field in Crystal. Would you please add a field on the frames page that can be mapped to Etyp?

[smalltowneyedoc]

Agreed. Please add fields in the Crystal Frame Order page to communicate this to the DVI so the DVI remo integration works without errors. These are the areas that we have found that Crystal does not properly feed into the DVI:

E-type (example HB Hide-a-Bevel)
Tint (example SLD solid tint)
Frame material (example Crystal says "Metal" but DVI requires "METL")
Services (example Custom lens shape can be typed in the notes to lab section and shows up in this DVI field, but without any associated code)

[frencheyecare]

There are several other fields that could be mapped, added or modified from CPM to DVI. Can we please make these happen? This would greatly speed up workflow and decrease transcription errors. Fields that should be compatible are listed below:

CPM -> DVI
Optician/Staff -> Operator
Tray # -> RX#

Fields that need to be ADDED to CPM and mapped to DVI
Package -> Package
Special Situations on order -> Enc
Thickness -> Thck
Temple Style -> Tmpl Style
Frame Type -> Ftype
C-size -> Csize

Adjustments that need to be made to CPM in mapping to DVI
"Tint" label in CPM should be changed to "Color" as that is where it maps to in DVI and is actually a material subspecialty that defines types of transitions, BluTech, etc. instead of tint
"Lens Color" label should be changed to "Tint" and mapped to "Tint" in DVI. I understand this is sometimes used for Transitions specification, but that really belongs in the "Color" category above (realizing it is a misnomer in DVI).
"Coating" #1 should be "A/R Coating" (AR in DVI)
"Coating" #2 should be "Scratch Coating" (SCR in DVI)
"Coating" #3 should be "UV Coating" (UV in DVI)
"Other" should be "Mirror Coating" (Mir/Col in DVI)