|
Post by dbaframegirl on Jul 14, 2020 9:41:20 GMT -6
Anyone know if this printer, the Datamax EClass Mark III printer is compatible with Crystal? We were led to believe it would work. Also, we use the ARch Crown TT-364 labels. Thank you!
|
|
|
Post by dukeboi on Jul 21, 2020 12:33:06 GMT -6
I have tried to get this to work with many failed attempts. I was able to get the Datamax to print the labels from Crystal PM, but the problem that I ran into was that the TT-364 labels were not large enough to print a "readable" barcode. Because the barcode was squeezed into that label my scanner would not read the printed barcodes. I think that you should be able to get this printer to work only if you could find larger labels.
|
|