Post by mdeyedoc on Mar 16, 2016 20:40:49 GMT -6
For anyone using my template, I was recently made aware of a problem with the Final CL Rx button always setting the CL Type to Toric. The problem occurs when 0.00 is entered in the Cyl field because I was looking for ANY value in the cyl field. I have changed the button code to look for a value less than 0.00. Here is the new code for button 768 (set CL Type).
To fix this problem:
OR or you can manually edit the commands lines that set the value to Toric. Note: the command line has to say less than 0.00 and not just 0
Also note, there is no fix if you routinely enter 0.00 into the Add field by default. I cannot look for Add >0.00 because CL Bifocal Adds are not always numeric. The only fix is to remove the commands that set the CL Type to Bifocal and set it manually on the Rx tab when it is a bifocal.
Marcia
To fix this problem:
- Edit the med rec template
- Go to field 768
- Select Import under the list of button commands and select the attached file.
OR or you can manually edit the commands lines that set the value to Toric. Note: the command line has to say less than 0.00 and not just 0
Also note, there is no fix if you routinely enter 0.00 into the Add field by default. I cannot look for Add >0.00 because CL Bifocal Adds are not always numeric. The only fix is to remove the commands that set the CL Type to Bifocal and set it manually on the Rx tab when it is a bifocal.
Marcia